[OpenSuSE 10.2] Latest Nvidia Driver Intallation

[Source] Nvidia Installer HOWTO for SUSE LINUX users

People who aren't afraid of recompiling the nvidia kernel module
or even reinstalling the nvidia driver each time the kernel has been updated
and want or need to use the latest and greatest nvidia driver
can use the following steps 1-3.
The others should use the instructions above using YaST and skip the steps below.

1) Kernel sources must be installed and configured.
Usually this means installing the 'kernel-source', 'make' and 'gcc' packages with YaST2.

2) Use the nvidia installer for 100.14.19.

sh NVIDIA-Linux-x86-100.14.19-pkg1.run -q

3) Configure X.Org with

sax2 -r -m 0=nvidia (0 is a digit, not a letter!)

NOTE: There is no need to try to enable 3D support.
It's already enabled, when the nvidia driver is running.
IMPORTANT: You need to

recompile and install the nvidia kernel module after each kernel update.

sh NVIDIA-Linux-x86-100.14.19-pkg1.run -K