[Source] IBM developerWorks Tuning LAMP systems, Part 2

Tuning LAMP systems, Part 2: Optimizing Apache and PHP

What slows Apache down, and how to get the most out of PHP

Level: Intermediate

Sean A. Walberg (sean@ertw.com), Senior Network Engineer

30 Apr 2007

Applications using the LAMP (Linux®, Apache, MySQL, PHP/Perl) architecture are constantly being developed and deployed. But often the server administrator has little control over the application itself because it's written by someone else. This series of three articles discusses many of the server configuration items that can make or break an application's performance. This second article focuses on steps you can take to optimize Apache and PHP.

Linux, Apache, MySQL, and PHP (or Perl) form the basis of the LAMP architecture for Web applications. Many open source packages based on LAMP components are available to solve a variety of problems. As the load on an application increases, the bottlenecks in the underlying infrastructure become more apparent in the form of slow response to user requests. The previous article showed you how to tune the Linux system and covered the basics of LAMP and performance measurement. This article focuses on the Web server components, Apache and PHP.

Tuning Apache

Apache is a highly configurable piece of software. It has a lot of features, but each one comes at a price. Tuning Apache is partially an exercise in proper allocation of resources, and involves stripping down the configuration to only what's needed.

Configuring the MPM

Apache is modular in that you can add and remove features easily. Multi-Processing Modules (MPMs) provide this modular functionality at the core of Apache -- managing the network connections and dispatching the requests. MPMs let you use threads or even move Apache to a different operating system.

Only one MPM can be active at one time, and it must be compiled in statically with --with-mpm=(worker|prefork|event) .

The traditional model of one process per request is called prefork. A newer, threaded, model is called worker, which uses multiple processes, each with multiple threads to get better performance with lower overhead. The final, event MPM is an experimental module that keeps separate pools of threads for different tasks. To determine which MPM you're currently using, execute httpd -l.

Choosing the MPM to use depends on many factors. Setting aside the event MPM until it leaves experimental status, it's a choice between threads or no threads. On the surface, threading sounds better than forking, if all the underlying modules are thread safe, including all the libraries used by PHP. Prefork is the safer choice; you should do careful testing if you choose worker. The performance gains also depend on the libraries that come with your distribution and your hardware.

Regardless of which MPM you choose, you must configure it appropriately. In general, configuring an MPM involves telling Apache how to control how many workers are running, whether they're threads or processes. The important configuration options for the prefork MPM are shown in Listing 1.

Listing 1. Configuration of the prefork MPM

                
StartServers       50
MinSpareServers   15
MaxSpareServers   30
MaxClients       225
MaxRequestsPerChild  4000

In the prefork model, a new process is created per request. Spare processes are kept idle to handle incoming requests, which reduces the start-up latency. The previous configuration starts 50 processes as soon as the Web server comes up and tries to keep between 10 and 20 idle servers running. The hard limit on processes is dictated by MaxClients. Even though a process can handle many consecutive requests, Apache kills off processes after 4,000 connections, which mitigates the risk of memory leaks.

Configuring the threaded MPMs is similar, except that you must determine how many threads and processes are to be used. The Apache documentation explains all the parameters and calculations necessary.

Choosing the values to use involves some trial and error. The most important value is MaxClients. The goal is to allow enough worker processes or threads to run without causing your server to swap excessively. If more requests come in than can be handled, then at least those that made it through get service; the others are blocked.

If MaxClients is too high, then all clients experience poor service because the Web server tries to swap out one process to allow another one to run. Too low a setting means you may deny services unnecessarily. Checking the number of processes running at high loads and the resulting memory footprint of all the Apache processes gives you a good idea of how to set this value. If you go over 256 MaxClients, you must also set ServerLimit to the same number; read the MPM's documentation carefully for the associated caveats.

Tuning the number of servers to start and keep spare depends on the role of the server. If the server runs only Apache, you can use modest values as shown in Listing 1, because you're able to make full use of the machine. If the system is shared with a database or other server, then you should limit the number of spare servers being run.

Compiling your own software

When I got started with UNIX®, I insisted on compiling my own software for everything I put on my systems. Maintaining updates eventually caught up with me, so I learned how to build packages to ease this task. Eventually, I realized that most of the time I was duplicating the effort the distribution was doing; now, for the most part, I stick with whatever is provided by my distribution of choice when I can, and roll my own packages when I must.

Similarly, you may find that maintainability of vendor packages outweighs the benefits of going with the latest and greatest code. Sometimes performance tuning and systems administration have conflicting goals. You may have to consider vendor support if you're using a commercial Linux or relying on third-party support.

If you strike out on your own, learn how to build packages that work with your distribution and how to integrate them into your patching system. This will ensure that the software, along with any tweaks you make, are built consistently and can be used across multiple systems. Also keep on top of software updates by subscribing to the appropriate mailing lists and Rich Site Summary (RSS) feeds.

Using options and overrides efficiently

Each request that Apache processes goes through a complicated set of rules that dictates any restrictions or special instructions the Web server must follow. Access to a folder can be restricted by IP address to a certain folder, or a username and password can be configured. These options also include the handling of certain files, such as if a directory listing is provided, how certain filetypes are to be handled, or whether the output should be compressed.

These configurations take the form of containers in httpd.conf such as <Directory> to specify that the configuration to follow refers to a location on disk, or <Location> to indicate that the reference is to a path in the URL. Listing 2 shows a Directory container in action.

Listing 2. A Directory container being applied to the root directory

<Directory /> AllowOverride None Options FollowSymLinks </Directory>

In Listing 2, the configuration enclosed in the Directory and /Directory tags is applied to the given directory and everything under it — in this case, the root directory. Here, the AllowOverride tag dictates that users aren't allowed to override any options (more on this later). The FollowSymLinks option is enabled, which lets Apache look past symlinks to serve the request, even if the file is outside the directory containing Web files. This means that if a file in your Web directory is a symlink to /etc/passwd, the Web server happily serves the file if asked. With -FollowSymLinks used instead, this feature is disabled, and the same request causes an error to be returned to the client.

This last scenario is a cause for concern on two fronts. The first is a performance matter. If FollowSymLinks is disabled, then Apache must check each component of the filename (directories and the file itself) to make sure they're not symbolic links. This incurs extra overhead in the form of disk activity. A companion option called FollowSymLinksIfOwnerMatch follows the symbolic link if the owner of the file is the same as that of the link. This has the same performance hit as disabling following of symlinks. For best performance, use the options in Listing 2.

Security-conscious readers should be alert by now. Security is always a trade-off between functionality and risk. In this case, the functionality is speed, and the risk is allowing unauthorized access to files on the system. One of the mitigations is that LAMP application servers are generally dedicated to a particular function, and users can't create the potentially dangerous symbolic links. If it's vital to have symbolic link-checking enabled, you can restrict it to a particular area of the file system, as in Listing 3.

Listing 3. Restricting FollowSymLinks to a user's directory

<Directory /> Options FollowSymLinks </Directory> <Directory /home/*/public_html> Options -FollowSymLinks </Directory>

In Listing 3, any public_html directory in a user's home directory has the FollowSymLinks option removed for it and any child directories.

As you've seen, options can be configured on a per-directory basis through the main server configuration. Users can override this server configuration themselves (if permitted by the administrator by the AllowOverrides statement) by dropping a file called .htaccess into a directory. This file contains additional server directives that are loaded and followed on each request to the directory where the .htaccess file resides. Despite the earlier discussion about not having users on the system, many LAMP applications use this functionality to control access and for URL rewriting, so it's wise to understand how it works.

Even though the AllowOverrides statement prevents users from doing anything you don't want them to, Apache must still look for the .htaccess file to see if there is any work to be done. A parent directory can specify directives that are to be processed by requests from child directories, which means Apache must also search each component of the directory tree leading to the requested file. Understandably, this causes a great deal of disk activity on each request.

The easiest solution is to not allow any overrides, which eliminates the need for Apache to check for .htaccess. Any special configurations are then placed directly in httpd.conf. Listing 4 shows the additions to httpd.conf to enable password checking for a user's project directory, rather than putting in a .htaccess file and relying on AllowOverrides.

Listing 4. Moving .htaccess configuration into httpd.conf

<Directory /home/user/public_html/project/> AuthUserFile /home/user/.htpasswd AuthName "uber secret project" AuthType basic Require valid-user </Directory>

If the configuration is moved into httpd.conf and AllowOverrides is disabled, disk usage can be reduced. A user's project may not attract many hits, but consider how powerful this technique is when applied to a busy site.

Sometimes it's not possible to eliminate use of .htaccess files. For example, in Listing 5, where an option is restricted to a certain part of the file system, overrides can also be scoped.

Listing 5. Scoping .htaccess checking

<Directory /> AllowOverrides None </Directory> <Directory /home/*/public_html> AllowOverrides AuthConfig </Directory>

After you implement Listing 5, Apache still looks for .htaccess files in the parent directories, but it stops in the public_html directory because the rest of the file system has the functionality disabled. For example, if a file that maps to /home/user/public_html/project/notes.html is requested, only the public_html and project directories are searched.

One final note about per-directory configurations is in order. Any document about tuning Apache will tell you to disable DNS lookups through the HostnameLookups off directive because trying to reverse-resolve every IP address connecting to your server is a waste of resources. However, any limitations based on hostname force the Web server to perform a reverse lookup on the client's IP address and a forward lookup on the result of that to verify the authenticity of the name. Therefore, it's wise to avoid using access controls based on the client's hostname and to scope them as described when they're necessary.

Persistent connections

When a client connects to a Web server, it's allowed to issue multiple requests over the same TCP connection, which reduces the latency associated with multiple connections. This is useful when a Web page refers to several images: The client can request the page and then all the images over one connection. The downside is that the worker process on the server has to wait for the session to be closed by the client before it can move on to the next request.

Apache lets you configure how persistent connections, called keepalives, are handled. KeepAlive 5 at the global level of httpd.conf allows the server to handle 5 requests on a connection before forcing the connection closed. Setting this number to 0 disables the use of persistent connections. KeepAliveTimeout, also at the global level, determines how long Apache will wait for another request before closing the session.

Handling persistent connections isn't a one-size-fits-all configuration. Some Web sites fare better with keepalives disabled (KeepAlive 0), and some experience a tremendous benefit by having them on. The only solution is to try both and see for yourself. It's advisable, though, to use a low timeout such as 2 seconds with KeepAliveTimeout 2 if you enable keepalives. This ensures that any client wishing to make another request has ample time, and that worker processes aren't idling while waiting for another request that may never come.

Compression

The Web server can compress the output before it's sent back to the client. This results in a smaller page being sent over the Internet at the expense of CPU cycles on the Web server. For those servers that can afford the CPU overhead, this is an excellent way of making pages download faster — it isn't unheard of for pages to be a third of their size after compression.

Images are generally already compressed, so compression should be limited to text output. Apache provides compression through mod_deflate. Although mod_deflate can be simple to turn on, it includes many complexities that the manual is eager to explain. This article doesn't cover the configuration of compression except to provide a link to the appropriate documentation (see the Resources section.)

Tuning PHP

PHP is the engine that runs the application code. You should install only the modules you plan to use and have your Web server configured to use PHP only for script files (usually those ending in .php) and not all static files.

Opcode caching

When a PHP script is requested, PHP reads the script and compiles it into what's called Zend opcode, a binary representation of the code to be executed. This opcode is then executed by the PHP engine and thrown away. An opcode cache saves this compiled opcode and reuses it the next time the page is called. This saves a considerable amount of time. Several opcode caches are available; I've had a great deal of success with eAccelerator.

Installing eAccelerator requires the PHP development libraries on your computer. Because different Linux distributions place files in difference places, it's best to get the installation instructions directly from the eAccelerator Web site (see the Resources section for a link). It's also possible that your distribution has already packaged an opcode cache, and you just have to install it.

Regardless of how you get eAccelerator on your system, there are a few configuration options to look at. The configuration file is usually /etc/php.d/eaccelerator.ini. eaccelerator.shm_size defines the size of the shared memory cache, which is where the compiled scripts are stored. The value is in megabytes. Determining the proper size depends on your application. eAccelerator provides a script to show the status of the cache, which includes the memory usage; 64 megabytes is a good start (eaccelerator.shm_size="64"). You may also have to tweak your kernel's maximum shared memory size if the value you choose isn't accepted. Add kernel.shmmax=67108864 to /etc/sysctl.conf, and run sysctl -p to make the setting take effect. The value for kernel.shmmax is in bytes.

If the shared memory allocation is exceeded, eAccelerator must purge old scripts from memory. By default, this is disabled; eaccelerator.shm_ttl = "60" specifies that when eAccelerator runs out of shared memory, any script that hasn't been accessed in 60 seconds should be purged.

Another popular alternative to eAccelerator is the Alternative PHP Cache (APC). The makers of Zend also have a commercial opcode cache that includes an optimizer to further increase efficiency.

php.ini

You configure PHP in php.ini. Four important settings control how much system resources PHP can consume, as listed in Table 1.

Table 1. Resource related settings in php.ini

Setting	Description	Recommended value
max_execution_time	How many CPU-seconds a script can consume	30
max_input_time	How long (seconds) a script can wait for input data	60
memory_limit	How much memory (bytes) a script can consume before being killed	32M
output_buffering	How much data (bytes) to buffer before sending out to the client	4096

These numbers depend mostly on your application. If you accept large files from users, then max_input_time may have to be increased, either in php.ini or by overriding it in code. Similarly, a CPU- or memory-heavy program may need larger settings. The purpose is to mitigate the effect of a runaway program, so disabling these settings globally isn't recommended. Another note on max_execution_time: This refers to the CPU time of the process, not the absolute time. Thus a program that does lots of I/O and few calculations may run for much longer than max_execution_time. It's also how max_input_time can be greater than max_execution_time

The amount of logging that PHP can do is configurable. In a production environment, disabling all but the most critical logs saves disk writes. If logs are needed to troubleshoot a problem, you can turn up logging as needed. error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR turns on enough logging to spot problems but eliminates a lot of chatter from scripts.

Summary

This article focused on tuning the Web server, both Apache and PHP. With Apache, the general idea is to eliminate extra checks the Web server must do, such as processing the .htaccess file. You must also tune the Multi-Processing Module you're using to balance the system resources used with the availability of idle workers for incoming requests. The best thing you can do for PHP is to install an opcode cache. Keeping your eye on a few resource settings also ensures that scripts don't hog resources and make the system slow for everyone else.

The next and final article in this series will look at tuning the MySQL database. Stay tuned!

Resources

more..

Learn

• "Quantify performance changes using application tracing" (developerWorks, July 2006) shows how to use application tracing to show the effect of configuration changes on Apache.
  
  
• "Using the new memory manager" (developerWorks, March 2007) covers the latest changes to PHP 5.2's handling of memory. PHP is constantly refining its use of system resources.
  
  
• mod_deflate is an Apache module that compresses output on the fly. This can also be done in PHP through output compression.
  
  
• Pre-caching compressed static files such as JavaScript code. CSS is another way to improve performance. Compressing and concatenating all your JavaScript code and CSS is even better.
  
  
• The Apache documentation on Multi-Processing Modules is worth reading to learn about the functionality of each; follow the links to the specific documentation for the MPM you choose.
  
  
• In the developerWorks Linux zone, find more resources for Linux developers.
  
  
• Stay current with developerWorks technical events and Webcasts.

Get products and technologies

• If your distribution doesn't include eAccelerator, the Install From Source instructions will be helpful.
  
  
• The Alternative PHP Cache and Zend Platform are alternatives to eAccelerator.
  
  
• Siege lets you simulate users, so you can find out how much traffic your site can handle.
  
  
• Sooner or later you're going to want to cache certain elements of your site and distribute load across multiple Web servers. Squid in accelerator mode (also known as a reverse proxy) or the Linux Virtual Server Project are excellent tools.
  
  
• Order the SEK for Linux, a two-DVD set containing the latest IBM trial software for Linux from DB2®, Lotus®, Rational®, Tivoli®, and WebSphere®.
  
  
• With IBM trial software, available for download directly from developerWorks, build your next development project on Linux.
  
  

Discuss
Check out developerWorks blogs and get involved in the developerWorks community.